Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Soar 3210: (1 year) CAL VER /5500
DATE:                  10-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.4 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       20
NUMBER OF LINES:       104
CONFIGURATION:         Fluke 5500A
=============================================================================
#
# Compatibility:
#   5500/CAL 4.0 or MET/CAL 4.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   3210V.bmp
#   3210C.bmp
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R                    P                            F        V
  1.002  ASK+           K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS
  1.004  DISP         Warm-up time: NONE
  1.004  DISP         Temperature: 18 - 28 degC
  1.004  DISP         Humidity: <80%
  1.005  DISP         [32]                WARNING
  1.005  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.005  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.005  DISP         personnel fail to observe safety precautions.
  1.006  HEAD         {DC VOLTAGE}
  1.007  PIC          3210v
  1.008  DISP         Turn the FUNCTION switch to DC V.
  1.009  HEAD         DC VOLTAGE: {300mV Range}
  1.010  5500   300   300.0mV        0.6% 0.2U                             2W
  2.001  HEAD         DC VOLTAGE: {3V Range}
  2.002  5500   3     3.000V         0.8% 0.001U                           2W
  3.001  HEAD         DC VOLTAGE: {30V Range}
  3.002  5500   30    30.00V         0.8% 0.01U                            2W
  4.001  HEAD         DC VOLTAGE: {300V Range}
  4.002  5500   300   300.0V         0.8% 0.1U                             2W
  5.001  HEAD         DC VOLTAGE: {1000V Range}
  5.002  5500   1000  1000V          0.8% 1U                               2W
  6.001  HEAD         {AC VOLTAGE}
  6.002  DISP         Turn the FUNCTION switch to AC V.
  6.003  HEAD         AC VOLTAGE: {3V Range}
  6.004  5500   3     3.000V         1.5% 0.004U   100H           SI       2W
  7.001  HEAD         AC VOLTAGE: {30V Range}
  7.002  5500   30    30.00V         1.5% 0.04U    100H           SI       2W
  8.001  HEAD         AC VOLTAGE: {300V Range}
  8.002  5500   300   300.0V         1.5% 0.4U     100H           SI       2W
  9.001  HEAD         AC VOLTAGE: {750V Range}
  9.002  5500   750   700V           1.5% 4U       100H           SI       2W
 10.001  HEAD         {RESISTANCE}
 10.002  DISP         Turn the FUNCTION switch to OHMS.
 10.003  HEAD         RESISTANCE: {30 MOhm Range}
 10.004  5500   30    19.00MZ        3% 0.01U                              2W
 11.001  HEAD         RESISTANCE: {3 MOhm Range}
 11.002  5500   3     1.900MZ        1.5% 0.001U                           2W
 12.001  HEAD         RESISTANCE: {300 kOhm Range}
 12.002  5500   300   190.0kZ        1% 0.1U                               2W
 13.001  HEAD         RESISTANCE: {30 kOhm Range}
 13.002  DISP         Connect the 5500A to the UUT as follows:
 13.002  DISP         [32] 5500A AUX HI to UUT V/OHM
 13.002  DISP         [32] 5500A AUX LO to UUT COM
 13.002  DISP         [32] 5500A NORMAL HI to UUT V/OHM
 13.002  DISP         [32] 5500A NORMAL LO to UUT COM
 13.002  DISP         Connect the SENSE leads DIRECTLY to the UUT.  Connect
 13.002  DISP         the NORMAL leads to the SENSE leads AT the UUT.
 13.003  5500   30    19.00kZ        1% 0.01U                              CW
 14.001  HEAD         RESISTANCE: {3 kOhm Range}
 14.002  5500   3     1.900kZ        1% 0.001U                             CW
 15.001  HEAD         RESISTANCE: {300 Ohm Range}
 15.002  5500   300   190.0Z         1% 0.2U                               CW
 16.001  HEAD         {CONTINUITY}
 16.002  DISP         Press the MODE SELECTION button to select CONTINUITY.
 16.003  5500         10Z                                               S  CW
 16.004  EVAL   Is there an AUDIBLE TONE present (continuity test)?
 17.001  HEAD         {DIODE}
 17.002  PIC          3210v
 17.003  DISP         Press the MODE SELECTION button to select DIODE.
 17.004  M550   RNGLK 33V
 17.005  5500         0.500V         0.3% 0.003U                           2W
 18.001  M550         *
 18.002  HEAD         {DC CURRENT}
 18.003  DISP         Turn the FUNCTION switch to 10A.
 18.004  PIC          3210c
 18.005  HEAD         DC CURRENT: {10A Range}
 18.006  5500   10    5.00A          1.5% 0.02U                            2W
 19.001  HEAD         {AC CURRENT}
 19.002  DISP         Press the MODE SELECTION button to select AC amps.
 19.003  HEAD         AC CURRENT: {10A Range}
 19.004  5500   10    5.00A          2% 0.05U      100H           SI       2W
 20.001  END